Manufacturer for Nema 24 Stepper Motor - Nema 24 (60mm) stepper motor – Thinker
Manufacturer for Nema 24 Stepper Motor - Nema 24 (60mm) stepper motor – Thinker Detail:
>> Short Descriptions
Motor Type | Bipolar stepper |
Step Angle | 1.8° |
Voltage (V) | 2.1 / 2.9 / 3.2 / 3.7 / 4.1 |
Current (A) | 5 |
Resistance (Ohms) | 0.42 / 0.57 / 0.64 / 0.74 / 0.81 |
Inductance (mH) | 1.3 / 1.98 / 2.3 / 2.83 / 3.23 |
Lead Wires | 4 |
Holding Torque (N.m) | 1.5 / 2.5 / 3 / 3.5 / 4 |
Motor Length (mm) | 55 / 75 / 84 / 100 / 112 |
Ambient Temperature | -20℃ ~ +50℃ |
Temperature Rise | 80K Max. |
Dielectric Strength | 1mA Max. @ 500V, 1KHz, 1Sec. |
Insulation Resistance | 100MΩ Min. @500Vdc |
Application
Medical diagnostic equipment, life science instruments, robots, laser equipment, analytical instruments, semiconductor equipment, electronic production equipment, non-standard automation equipment and various types of automation equipment.
>> Certifications
>> Electrical Parameters
Motor Size |
Voltage/ Phase (V) |
Current/ Phase (A) |
Resistance/ Phase (Ω) |
Inductance/ Phase (mH) |
Number of Lead Wires |
Rotor Inertia (g.cm2) |
Holding Torque (N.m) |
Motor Length L (mm) |
60 |
2.1 |
5 |
0.42 |
1.3 |
4 |
340 |
1.5 |
55 |
60 |
2.9 |
5 |
0.57 |
1.98 |
4 |
590 |
2.5 |
75 |
60 |
3.2 |
5 |
0.64 |
2.3 |
4 |
690 |
3 |
84 |
60 |
3.7 |
5 |
0.74 |
2.83 |
4 |
850 |
3.5 |
100 |
60 |
4.1 |
5 |
0.81 |
3.23 |
4 |
960 |
4 |
112 |
>> General technical parameters
Radial clearance |
0.02mm Max (450g load) |
Insulation resistance |
100MΩ @500VDC |
Axial clearance |
0.08mm Max (450g load) |
Dielectric strength |
500VAC, 1mA, 1s@1KHZ |
Max radial load |
70N (20mm from flange surface) |
Insulation class |
Class B (80K) |
Max axial load |
15N |
Ambient temperature |
-20℃ ~ +50℃ |
>> 60HS2XX-X-4A motor outline drawing
>> Torque-frequency curve
Test condition:
Chopper drive, half micro-stepping, drive voltage 40V
Product detail pictures:
Related Product Guide:
It is our responsibility to meet your needs and efficiently serve you. Your satisfaction is our best reward. We are looking forward to your visit for joint growth for Manufacturer for Nema 24 Stepper Motor - Nema 24 (60mm) stepper motor – Thinker , The product will supply to all over the world, such as: Algeria, San Diego, Morocco, Our company sets up several departments, including production department, sales department, quality control department and sevice center,etc. only for accomplish the good-quality product to meet customer's demand, all of our products have been strictly inspected before shipment. We always think about the question on the side of the customers,because you win,we win!
By Carey from Portland - 2017.08.15 12:36
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Jason from Qatar - 2017.12.31 14:53