Factory making Stepping Motor With Encoder - Nema 24 (60mm) stepper motor – Thinker
Factory making Stepping Motor With Encoder - Nema 24 (60mm) stepper motor – Thinker Detail:
>> Short Descriptions
Motor Type | Bipolar stepper |
Step Angle | 1.8° |
Voltage (V) | 2.1 / 2.9 / 3.2 / 3.7 / 4.1 |
Current (A) | 5 |
Resistance (Ohms) | 0.42 / 0.57 / 0.64 / 0.74 / 0.81 |
Inductance (mH) | 1.3 / 1.98 / 2.3 / 2.83 / 3.23 |
Lead Wires | 4 |
Holding Torque (N.m) | 1.5 / 2.5 / 3 / 3.5 / 4 |
Motor Length (mm) | 55 / 75 / 84 / 100 / 112 |
Ambient Temperature | -20℃ ~ +50℃ |
Temperature Rise | 80K Max. |
Dielectric Strength | 1mA Max. @ 500V, 1KHz, 1Sec. |
Insulation Resistance | 100MΩ Min. @500Vdc |
Application
Medical diagnostic equipment, life science instruments, robots, laser equipment, analytical instruments, semiconductor equipment, electronic production equipment, non-standard automation equipment and various types of automation equipment.
>> Certifications
>> Electrical Parameters
Motor Size |
Voltage/ Phase (V) |
Current/ Phase (A) |
Resistance/ Phase (Ω) |
Inductance/ Phase (mH) |
Number of Lead Wires |
Rotor Inertia (g.cm2) |
Holding Torque (N.m) |
Motor Length L (mm) |
60 |
2.1 |
5 |
0.42 |
1.3 |
4 |
340 |
1.5 |
55 |
60 |
2.9 |
5 |
0.57 |
1.98 |
4 |
590 |
2.5 |
75 |
60 |
3.2 |
5 |
0.64 |
2.3 |
4 |
690 |
3 |
84 |
60 |
3.7 |
5 |
0.74 |
2.83 |
4 |
850 |
3.5 |
100 |
60 |
4.1 |
5 |
0.81 |
3.23 |
4 |
960 |
4 |
112 |
>> General technical parameters
Radial clearance |
0.02mm Max (450g load) |
Insulation resistance |
100MΩ @500VDC |
Axial clearance |
0.08mm Max (450g load) |
Dielectric strength |
500VAC, 1mA, 1s@1KHZ |
Max radial load |
70N (20mm from flange surface) |
Insulation class |
Class B (80K) |
Max axial load |
15N |
Ambient temperature |
-20℃ ~ +50℃ |
>> 60HS2XX-X-4A motor outline drawing
>> Torque-frequency curve
Test condition:
Chopper drive, half micro-stepping, drive voltage 40V
Product detail pictures:
Related Product Guide:
We not only will try our best to offer excellent services to every customer, but also are ready to receive any suggestion offered by our customers for Factory making Stepping Motor With Encoder - Nema 24 (60mm) stepper motor – Thinker , The product will supply to all over the world, such as: Slovenia, Mexico, Washington, Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
By Arlene from Albania - 2017.08.18 18:38
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Dee Lopez from Melbourne - 2018.10.01 14:14