Chinese Professional Closed Loop Stepper Controller - Nema 24 (60mm) stepper motor – Thinker
Chinese Professional Closed Loop Stepper Controller - Nema 24 (60mm) stepper motor – Thinker Detail:
>> Short Descriptions
Motor Type | Bipolar stepper |
Step Angle | 1.8° |
Voltage (V) | 2.1 / 2.9 / 3.2 / 3.7 / 4.1 |
Current (A) | 5 |
Resistance (Ohms) | 0.42 / 0.57 / 0.64 / 0.74 / 0.81 |
Inductance (mH) | 1.3 / 1.98 / 2.3 / 2.83 / 3.23 |
Lead Wires | 4 |
Holding Torque (N.m) | 1.5 / 2.5 / 3 / 3.5 / 4 |
Motor Length (mm) | 55 / 75 / 84 / 100 / 112 |
Ambient Temperature | -20℃ ~ +50℃ |
Temperature Rise | 80K Max. |
Dielectric Strength | 1mA Max. @ 500V, 1KHz, 1Sec. |
Insulation Resistance | 100MΩ Min. @500Vdc |
Application
Medical diagnostic equipment, life science instruments, robots, laser equipment, analytical instruments, semiconductor equipment, electronic production equipment, non-standard automation equipment and various types of automation equipment.
>> Certifications
>> Electrical Parameters
Motor Size |
Voltage/ Phase (V) |
Current/ Phase (A) |
Resistance/ Phase (Ω) |
Inductance/ Phase (mH) |
Number of Lead Wires |
Rotor Inertia (g.cm2) |
Holding Torque (N.m) |
Motor Length L (mm) |
60 |
2.1 |
5 |
0.42 |
1.3 |
4 |
340 |
1.5 |
55 |
60 |
2.9 |
5 |
0.57 |
1.98 |
4 |
590 |
2.5 |
75 |
60 |
3.2 |
5 |
0.64 |
2.3 |
4 |
690 |
3 |
84 |
60 |
3.7 |
5 |
0.74 |
2.83 |
4 |
850 |
3.5 |
100 |
60 |
4.1 |
5 |
0.81 |
3.23 |
4 |
960 |
4 |
112 |
>> General technical parameters
Radial clearance |
0.02mm Max (450g load) |
Insulation resistance |
100MΩ @500VDC |
Axial clearance |
0.08mm Max (450g load) |
Dielectric strength |
500VAC, 1mA, 1s@1KHZ |
Max radial load |
70N (20mm from flange surface) |
Insulation class |
Class B (80K) |
Max axial load |
15N |
Ambient temperature |
-20℃ ~ +50℃ |
>> 60HS2XX-X-4A motor outline drawing
>> Torque-frequency curve
Test condition:
Chopper drive, half micro-stepping, drive voltage 40V
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of Chinese Professional Closed Loop Stepper Controller - Nema 24 (60mm) stepper motor – Thinker , The product will supply to all over the world, such as: Oman, Southampton, Holland, Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Nicci Hackner from Uganda - 2018.11.02 11:11
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Adelaide from Guinea - 2017.05.02 11:33